Fully Integrated Microfluidic Device for Magnetic Bead Manipulation to Assist Rapid Reaction and Cleaning.

Methods to manipulate magnetic beads are essential factors to determine the efficiency and dimension of an in vitro diagnostic system. Currently, using movable permanent magnets and planar electromagnets is still the major approach to achieve magnetic bead control, causing significant constraint in the miniaturization of in vitro diagnostic systems. Here, we propose techniques to construct a fully integrated microfluidic device that can conduct automatic magnetic bead manipulation as well as rapid chemical reaction and cleaning in a minimized dimension similar to a USB disk. The device combines the precision control of multiple electromagnetic coils with the compactness of microfluidic channels, leading to one of the smallest automatic magnetic bead manipulation systems that can complete several major magnetic bead-based operation steps such as sample injection, reaction, cleaning, and collection. The influencing factors such as coil driving parameters, surface treatment of the microchannels, and properties of magnetic particles have also been investigated to optimize the device performance. The device can drive mixtures of Fe3O4 microparticles and polymer magnetic beads (PMBs) with a weight ratio of 1:1 at a maximum speed of 0.5 cm·s-1 and reduce the time for DNA binding and dissociation reactions from 20 min to only 48 s. This device has significantly advanced the conventional manipulation methods of magnetic beads and has demonstrated the possibility to construct an automatic and ultraminiaturized in vitro diagnostic system that may facilitate portable or even wearable chemical analysis.

In Situ Formation of Conductive Epidermal Electrodes Using a Fully Integrated Flexible System and Injectable Photocurable Ink.

In situ fabrication of wearable devices through coating approaches is a promising solution for the fast deployment of wearable devices and more adaptable devices for different sensing demands. However, heat, solvent, and mechanical sensitivity of biological tissues, along with personal compliance, pose strict requirements for coating materials and methods. To address this, a biocompatible and biodegradable light-curable conductive ink and an all-in-one flexible system that conducts in situ injection and photonic curing of the ink as well as monitoring of biophysiological information have been developed. The ink can be solidified through spontaneous phase changes and photonic cured to achieve a high mechanical strength of 7.48 MPa and an excellent electrical conductivity of 3.57 × 105 S/m. The flexible system contains elastic injection chambers embedded with specially designed optical waveguides to uniformly dissipate visible LED light throughout the chambers and rapidly cure the ink in 5 min. The resulting conductive electrodes offer intimate skin contact even with the existence of hair and work stably even under an acceleration of 8 g, leading to a robust wearable system capable of working under intense motion, heavy sweating, and varied surface morphology. Similar concepts may lead to various rapidly deployable wearable systems that offer excellent adaptability to different monitoring demands for the health tracking of large populations.

Stable and Dynamic Multiparameter Monitoring on Chests Using Flexible Skin Patches with Self-Adhesive Electrodes and a Synchronous Correlation Peak Extraction Algorithm.

Advances in wearable bioelectronics interfacing directly with skin offer important tools for non-invasive measurements of physiological parameters. However, wearable monitoring devices majorly conduct static sensing to avoid signal disturbance and unreliable contact with the skin. Dynamic multiparameter sensing is challenging even with the advanced flexible skin patches. This epidermal electronics system with self-adhesive conductive electrodes to supply stable skin contact and a unique synchronous correlation peak extraction (SCPE) algorithm to minimize motion artifacts in the photoplethysmogram (PPG) signals. The skin patch system can simultaneously and precisely monitor electrocardiogram (ECG), PPG, body temperature, and acceleration on chests undergoing daily activities. The low latency between the ECG and the PPG signals enables the SCPE algorithm that leads to reduced errors in deduced heart rates and improved performance in oxygen level determination than conventional adaptive filtering and wavelet transformation approaches. Dynamic multiparameter recording over 24 h by the system can reflect the circadian patterns of the wearers with low disturbance from motion artifacts. This demonstrated system may be applied for health monitoring in large populations to alleviate pressure on medical systems and assist management of public health crisis.

Significant Stretchability Enhancement of a Crack-Based Strain Sensor Combined with High Sensitivity and Superior Durability for Motion Monitoring.

Flexible strain sensors have attracted tremendous interest due to their potential application as intelligent wearable sensing devices. Among them, crack-based flexible strain sensors have been studied extensively owing to their ultrahigh sensitivity. Nevertheless, the detection range of a crack-based sensor is quite narrow, limiting its application. In this work, a stretchable strain sensor based on a designed crack structure was fabricated by spray-coating carbon nanotube (CNT) ink onto an electrospun thermoplastic polyurethane (TPU) fibrous mat and prestretching treatment to overcome the trade-off relationship. Our sensor exhibited combined features of high sensitivity in a greatly widened workable sensing range [a gauge factor of 428.5 within 100% strain, 9268.8 for a strain of 100-220%, and larger than 83982.8 for a strain of 220-300%], a fast response time (about 70 ms), superior durability (>10 000 stretching-releasing cycles), and excellent response toward bending. The microstructural evolution of CNT branches extending from two edges of the cracks and the excellent stretchability of TPU fibrous mats are mainly related to the remarkable sensing properties. Our sensor is then assembled to detect various human motions and physical vibrational signals, demonstrating its potential applications in intelligent devices, electronic skins, and wearable healthcare monitors.